| |
|
| |
Gin Wei provides below regrinds:
1.PMMA
2.PC+AC、MS+PS、MS+PS+AC
PMMA, full name is Polymethylmethacrylate; also refers to as Acrylic. Another short form is AC. The advantages of acrylic are transparent, weather resistant, hard impact, smooth surface, and water resistant.
Gin Wei’s PMMA applies on stereo system cover, TV casing cover, hair accessories, office supplies, and kitchen wear… etc.
Gin Wei’s PC+AC, MS+PS, MS+PS+AC are best for boards makers. Final products include advertisement boards and plastic roofing.
|
 |
|
| |
|
| |
Typical Characteristics
ACRYREXR CM-207
Properties |
Test Method |
Test Condition |
Unit |
Regrind |
Tensile Strength |
ASTM D638 |
1/8”, 6 mm/min |
Kg2/cm2 (lb/in ) |
680(9700) |
Tensile Elongation |
ASTM D638 |
1/8”, 6 mm/min |
% |
5.0 |
Flexural Strength |
ASTM D790 |
1/4”, 2.8 mm/min |
Kg2/cm2 (lb/in ) |
1000(14200) |
Flexural Modulus |
ASTM D1003 |
1/8” |
% |
92 |
Izod Impact Strength |
ASTM D256 |
1/4”, 23℃ |
Kg-cm/cm(ft-lb/in) |
2.0(0.37) |
Melt Flow Index |
ASTM D1238 |
230℃,3.8Kg |
g/10min |
8.0 |
Hardness |
ASTM D785 |
1/4” |
M Scale |
85 |
Specific Gravity |
ASTM D792 |
23℃ |
- |
1.19 |
Vicat Softening Temp. |
ASTM D1525 |
1/8”, 50℃/hr |
℃(℉) |
105(221) |
Heat Distortion Temp. |
ASTM D648 |
1/4”, 120℃/hr |
℃(℉) |
92(198) |
Flammability |
UL 94 |
- |
- |
1/16”HB |
The data are intended as general guide for prime material only
|
| |
|
|
|
